Mitsubishi 18,000 BTU 20.2 SEER Standard P-Series Multi-Position Air Handler Heat Pump System

The Mitsubishi 18,000 BTU P-Series multi-position ducted air handler provides a solution to cool and heat zones in commercial spaces, or residential homes that need more capacity. It is unique in that it can be installed either vertically or horizontally. The PVA-A18AA7 & PUZ-A18NKA7 has selectable external static pressure: 0.30, 0.50 and 0.80 in.WG with 3 fan speeds at each static setting. It also has a 1 inch R4.2 fiberglass free insulation that reduces condensation and boosts efficiency. 

This system is perfect for customers that need to condition an entire house with existing ducted work while still experiencing the savings and comfort that comes with all Mitsubishi products. 

For proper installation, plan for:

1. Line Set – When hooking up the indoor air handler to the outdoor unit, you’ll need a 1/4″ x 1/2″ line-set kit  This is necessary for the start up and operation of the system. 
2. Disconnect Box & Electrical Whip Kit – The disconnect & whip kit  provides a safe and simple way to connect your outdoor condenser to your homes’ electrical panel.
3. Outdoor Condenser Plastic Pad (Optional) – This pad provides an even surface, free of debris, on which to place your outdoor condenser. It can also be used with snow-risers to provide separation from the ground. 
4. Outdoor Condenser Bracket (Optional) – This bracket provides an even surface, off the ground, on which to place your outdoor condenser. This bracket can handle up to 400 lbs and is great way to ground your outdoor unit system. 

General Information

• Unit Type: Multi-Position Air Handler
• Product Line: P-Series (PVA)
• Operating Mode: Cooling & Heating
• Low Ambient Heat: No
• Number of Zones: 1
• Unit Size: 18,000 BTU
• Line Set Size: 1/4 x 1/2″
• Required Install Kit:  IKIT1412
• WiFi Enabled: Yes with Kumo Cloud
• WiFi Built In: No

Package Includes

• Indoor Unit:  PVA-A18AA7

• Outdoor Unit: PUZ-A18NKA7

• Remote Control NOT INCLUDED

Performance

• Cooling Capacity 18,000 BTU
• Heating Capacity up to 23,000 BTU
• SEER: 20.2
• EER: 11.4
• HSPF: 10.4
• Heating Lockout Temperature: -8 F
• Cooling Minimum Temp: 0 F (with wind baffle)
• Room Cooling/Heating Capacity up to 850 sq ft

Outdoor Unit Specs

• Noise Level: Cooling: 44 dB(A)
• Noise Level: Heating: 46 dB(A)
• Size W: 31-13/16″ x  H:  24-13/16″ x D: 11-3/16″
• Weight: 100 lbs
• Electrical: 15 AMP

Indoor Unit Specs

• Noise Level: Cooling: 28-36 dB(A)
• Noise Level: Heating: 28-36 dB(A)
• Size W: 17″ x  H:  54-1/4″ x D: 21-5/8″
• Weight: 113 lbs

Certifications

• Energy Star: No
• ETL Listed Yes
• AHRI Certified Yes